• sales@gpppl.in
  • +91 98841 13300

7ply1 7ply1
7ply1
7ply2 7ply2
7ply2
7ply3 7ply3
7ply3
7ply4 7ply4
7ply4
7ply5 7ply5
7ply5
7ply6 7ply6
7ply6
7ply8 7ply8
7ply8
7ply9 7ply9
7ply9
7ply10 7ply10
7ply10
7ply11 7ply11
7ply11

7 Ply Fully Automatic Corrugated Line

1600Mm- 100Mtr Speed – AUTOMATIC 7 PLY CORRUGATED CARDBOARD PRODUCTION LINE

main technical parameters and requirements in production liner:

  • The maximum production width of the corrugated cardboard:
  • Design speed:100m/min.
  • Economic speed:60-80m/min.

Note:Production line speed test paper should meet the following requirements:(The surface temperature of the equipment is not less than 172?).

  • Paper rating of not less than B grade.
  • Paper moisture content of about:11%±2%.
  • Top paper:100—250g/m2.
  • Core paper:100–250g/m2.
  • Corrugated paper:100—200g/m2.

Flute-type combination:A ?C? B? E(As per customers’ requirement).

Steam the necessary requirements:

  • Amount of steam 2500—3000Kg/Hr.
  • The highest pressure:2MPa.
  • Common pressure:8-1.1MPa.

shaftless mill roll stand

  • Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.
  • Each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car;paper guide the use of channel 14 and the guide post weld,paper car adopt 10mmwelded stell,the length of track is 4500mm?
  • Manual dics brake,add screw following
  • Electric elements centralized control the electric elements,expand chuck.

 

RG-1-600 top(core)paper preheater:

  • In accordance with national standard category pressure vessel,and with the pressure vessel certificate.
  • The roll surface after precision grinding, fine grinding and hard chromium plating processing,surface friction, durable.
  • Electric adjustable angle, angle can rotate in the range of 360°,and adjust the  paper preheat area.

 

SF-280S fingerless type single facer:

  • Effective width :1600mm
  • Operation direction :left or right(determined in accordance with customer plant)
  • Design speed :100m/min
  • Temperature range:200—260?
  • Corrugated flute :(UV type or UVV type)

DF conveyor bridge

  • This part is the main beam of the 20th channel, 16-beam, angle iron 63, column, etc. are connected.
  • Both sides of the security fence, ladder , high-strength save people the word pedals, ensure the safety of personnel and easy to operate.
  • Pull the paper shaft surface tension axis, feeding shaft by grinding hard chrome plated.Vacuum tension control, 5-inch suction tube, plus regulating valves, air flow can be infinitely adjustable.
  • Dual front bezel correction guide column positioning, screw driver, fast and accurate positioning, walking steadily.

RG-2-600 triple preheater:

  • Preheat roller accord with the national standard of the pressure vessal,and enclosed the pressure container certificate and inspection certificate?
  • Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable?
  • Electric adjustable angle, it can rotated adjust the paper preheat area in the range of 360°?

 

GM-12 double glue machine

  • working width:1600mm
  • Operation direction:left or right(Determined in accordance with the customer’s facility)
  • Design speed:100m/min
  • Gas supply system:4—0.6Mpa
  • Preheat cylinder temperature range:150—200? Steam pressure:0.8—1.2Mpa

SM-10 type double facer

  • Temperature requirement:160—200? steam pressure:8-1.3MPa   2?air source pressure:0.6—0.9MPa.
  • Cooling stereotypes length:4m Heating plate quantity:9 pieces.
  • Hydraulic system pressure:6—8MPa.

thin knife slitting

  • Overcome the conventional type of pole, cutting pressure lines appear when collapsed cardboard cut phenomenon, cutting board smooth, quality has improved significantly.
  • The whole machine can remove left and right,cycloid reducer to adjust.
  • Cutter and easy to adjust the pressure line, the error ± 0.5mm, automatic sharpening device, you can achieve timing Brothers, with intermittent Brothers and other features.
  • The machine adopt five knives eight lines,the blade is made of tungsten alloy steel, the using life is not less than 3 million running meters

 

 

NC-120 NC cutter helical knives:

  • Minimum cutting length :500mm
  • Maximum cutting length:9999mm
  • Cutter accuracy : Uniform for ± 1mm, non-uniform to ± 2mm

DMT-120 paper sheet delivery and side conveyor:

  • Adopted on the 16th channel welded?Electric adjustment of cardboard the size of the lateral output pneumatic control board, electrically adjustable conveyor speed.
  • Cardboard sheets to the desired number or height requirements will be controlled by a foot switch out of cardboard?
  • Vertical bin using wide flat belt conveyor transport?
REQUEST CALLBACK

Get A Qoute :






X
CALL REQUEST