5 Ply Fully Automatic Corrugated Line
5 Ply Fully Automatic Corrugated Line
1600 Mm- 100Mtr Speed – AUTOMATIC 5 PLY CORRUGATED CARDBOARD PRODUCTION LINE
main technical parameters and requirements in production liner:
- The maximum production width of the corrugated cardboard:
- Design speed:100m/min.
- Economic speed:60-80m/min.
Note:Production line speed test paper should meet the following requirements:(The surface temperature of the equipment is not less than 172?).
- Paper rating of not less than B grade.
- Paper moisture content of about:11%±2%.
- Top paper:100—250g/m2.
- Core paper:100–250g/m2.
- Corrugated paper:100—200g/m2.
Flute-type combination:A ?C? B? E(As per customers’ requirement).
Steam the necessary requirements:
- Amount of steam 2500—3000Kg/Hr.
- The highest pressure:2MPa.
- Common pressure:8-1.1MPa.
shaftless mill roll stand
- Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.
- Each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car;paper guide the use of channel 14 and the guide post weld,paper car adopt 10mmwelded stell,the length of track is 4500mm?
- Manual dics brake,add screw following
- Electric elements centralized control the electric elements,expand chuck.
RG-1-600 top(core)paper preheater:
- In accordance with national standard category pressure vessel,and with the pressure vessel certificate.
- The roll surface after precision grinding, fine grinding and hard chromium plating processing,surface friction, durable.
- Electric adjustable angle, angle can rotate in the range of 360°,and adjust the paper preheat area.
SF-280S fingerless type single facer:
- Effective width :1600mm
- Operation direction :left or right(determined in accordance with customer plant)
- Design speed :100m/min
- Temperature range:200—260?
- Corrugated flute :(UV type or UVV type)
DF conveyor bridge
- This part is the main beam of the 20th channel, 16-beam, angle iron 63, column, etc. are connected.
- Both sides of the security fence, ladder , high-strength save people the word pedals, ensure the safety of personnel and easy to operate.
- Pull the paper shaft surface tension axis, feeding shaft by grinding hard chrome plated.Vacuum tension control, 5-inch suction tube, plus regulating valves, air flow can be infinitely adjustable.
- Dual front bezel correction guide column positioning, screw driver, fast and accurate positioning, walking steadily.
RG-2-600 triple preheater:
- Preheat roller accord with the national standard of the pressure vessal,and enclosed the pressure container certificate and inspection certificate?
- Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable?
- Electric adjustable angle, it can rotated adjust the paper preheat area in the range of 360°?
GM-12 double glue machine
- working width:1600mm
- Operation direction:left or right(Determined in accordance with the customer’s facility)
- Design speed:100m/min
- Gas supply system:4—0.6Mpa
- Preheat cylinder temperature range:150—200? Steam pressure:0.8—1.2Mpa
SM-10 type double facer
- Temperature requirement:160—200? steam pressure:8-1.3MPa 2?air source pressure:0.6—0.9MPa.
- Cooling stereotypes length:4m Heating plate quantity:9 pieces.
- Hydraulic system pressure:6—8MPa.
thin knife slitting
- Overcome the conventional type of pole, cutting pressure lines appear when collapsed cardboard cut phenomenon, cutting board smooth, quality has improved significantly.
- The whole machine can remove left and right,cycloid reducer to adjust.
- Cutter and easy to adjust the pressure line, the error ± 0.5mm, automatic sharpening device, you can achieve timing Brothers, with intermittent Brothers and other features.
- The machine adopt five knives eight lines,the blade is made of tungsten alloy steel, the using life is not less than 3 million running meters
NC-120 NC cutter helical knives:
- Minimum cutting length :500mm
- Maximum cutting length:9999mm
- Cutter accuracy : Uniform for ± 1mm, non-uniform to ± 2mm
DMT-120 paper sheet delivery and side conveyor:
- Adopted on the 16th channel welded?Electric adjustment of cardboard the size of the lateral output pneumatic control board, electrically adjustable conveyor speed.
- Cardboard sheets to the desired number or height requirements will be controlled by a foot switch out of cardboard?
- Vertical bin using wide flat belt conveyor transport?